Evolution Sail Sport

The Nacra Infusion is made with the latest production technology and hull design by a company famed for quality production. The Nacra Infusion is the most innovative sports catamaran on the World market.

Construction
The Nacra Infusion is the only production catamaran that is made with infusion technology. This technique makes sure that weigh distribution in manufacture produces a much stiffer hull compared to conventional methods, and stiffness of hull produces extra performance in high level racing for many more years. The production of dagger boards and rudder blades is also new, being made in three dimensional shaped aluminum moulds using high compression to give Nacra F18 Infusion stiffer and stronger blades for high level racing. The Nacra Infusion features a wing mast that provides superb rig dynamics coupled with advanced sail design from Performance Sails.

Hull design
Wave piercing technology is the way forward as the Nacra A2 has proved, and the Nacra Infusion develops this technique. Compared to conventional hull shapes, wave piercing hulls gives less water resistance hence more energy that can be turned into boat speed, especially upwind where the boat pitches less than other traditional F18's hence sailing significantly quicker. In light conditions the boat is wave piercing but as the wind increases the crew weight is moved further aft and the boat starts to plane upwind !! In contrast to classic designs, the Nacra F18 Infusion stabilizes itself at higher speeds due to dynamic lift, hence reducing pitching to low levels, which means that there is a more consistent airflow over the sails and rig which is translated into more boat speed. Features of the F18 infusion

Canted hulls 4 degrees
Innovative hull / deck water shearing design
Semi encapsulated front beam
Flush decks
Gybing dagger boards
Wing shape mast profile
Maximum raised rear beam
Self tacking jib system
Exclusive side lace mesh tramp
Pull up dagger board system
Low bridle
Nacra kick up rudder system
Canted frt. beam direction of mast rake
Shark fin high aspect rudder blades
Ultra-clean deck lay out
Nacra mid pole snuffer system
High aspect asymmetrical spinnaker
High aspect jib

High aspect square top main
Detail Length 5.52m
Beam ( width) 2,60m
Mast Lenght 9,08m
Weight 180kg
Mainsail area 17m2
Jib area 3.45 / 4.15 m2
Asym. Spinaker 19 / 21 m2
# Trapeze 2 persons in trapeze
Construction Infusion technology vinylester foam sandwich hulls
Design Nacra design team